操纵系统一般有两种操纵方式:机械式操纵和整体软轴操纵。
The control system generally has two control modes: mechanical control and integral flexible shaft control.
机械式操纵系统由副车架后台上机械操作和驾驶室软轴联合控制,它由操作手柄、旋转体、转轴-摇臂机构、连杆机构、推拉软轴和油门软轴组成。
The mechanical control system is jointly controlled by the mechanical operation on the background of the subframe and the flexible shaft of the cab. It is composed of an operating handle, a rotating body, a rotating shaft rocker arm mechanism, a connecting rod mechanism, a push-pull flexible shaft and a throttle flexible shaft.
后台机械操作系统中设置了机械限位,控制油泵控制阀的行程大小,在机械操作的行程范围内,操作是靠设置钢珠与弹簧压在定位孔上固定的,共分五个挡位,两个搅拌挡、两个卸料挡、一个空挡。在挡位间能无级控制搅拌筒的转速。
The mechanical limit is set in the background mechanical operation system to control the stroke of the oil pump control valve. Within the stroke range of mechanical operation, the operation is fixed by setting the steel ball and spring pressure on the positioning hole. It is divided into five gears, two mixing gears, two unloading gears and one neutral gear. The rotating speed of the mixing drum can be controlled steplessly between gears.
操纵系统主要控制搅拌筒的旋转方向及转速。
The control system mainly controls the rotation direction and speed of the mixing drum.
操纵系统能控制搅拌筒的五种工作状态:
The control system can control five working states of the mixing drum:
![全自动搅拌车](/uploadfile/2021/0830/20210830052032153.png)
进料:搅拌筒正转,转速为6~14r/min;
Feeding: the mixing drum rotates forward, and the rotating speed is 6 ~ 14R / min;
搅动:搅拌筒正转,转速为0~6r/min;
Stirring: the mixing drum rotates forward, and the rotating speed is 0 ~ 6R / min;
卸料:搅拌筒反转,转速为0~6r/min;
Unloading: the mixing drum is reversed, and the rotating speed is 0 ~ 6R / min;
高速卸料:搅拌筒反转,转速为6~14r/min;
High speed unloading: the mixing drum is reversed, and the rotating speed is 6 ~ 14R / min;
停止:搅拌筒静止状态。
Stop: the mixing drum is in a static state.
整体软轴式操纵系统是通过副车架后台上安装的软轴控制器,来控制搅拌筒正、反转和油门,它由软轴总成、U型卡、调节杆、辅助支座和推拉轴支座组成。
The integral flexible shaft control system controls the forward, reverse and throttle of the mixing drum through the flexible shaft controller installed on the background of the subframe. It is composed of flexible shaft assembly, U-card, adjusting rod, auxiliary support and push-pull shaft support.
This article is dedicated by the full-automatic mixer truck. For more knowledge, please click: http://www.sqjituan.cn Sincere attitude. To provide you with a comprehensive service. More relevant knowledge, we will continue to offer to you. Please look forward to it