自动搅拌一体车工作时电机发热怎么办？_行业资讯_自动混凝土搅拌机知识_自动混凝土搅拌机_自动混凝土搅拌车厂家

站内搜索

自动混凝土搅拌机知识

公司新闻行业资讯

热点

自上料搅拌车的轮胎多久换一次？

2021-03-24

搅拌机一体机的倒车误区有哪些？

2022-09-02

这才是混凝土机械设备该有的样子！

2022-12-02

自上料混凝土搅拌机空气滤清器如何正确保养？

2021-01-05

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

自动搅拌一体车工作时电机发热怎么办？

所属分类：行业资讯发布时间：2022-03-09 来源：http://www.sqjituan.cn/ 浏览量：0

电机是自动搅拌一体车的动力来源，电机的好坏也决定了搅拌车是否可以长时间进行工作。或许你在使用自动搅拌一体车时遇到了，电机发热的情况，是的，没错，自动搅拌一体车工作时间久了，电机也会散热，会出现发热的情况，除此之外，自动搅拌一体车使用后电机严重发热出现原因主要有以下两种原因造成：

The motor is the power source of the automatic mixer. The quality of the motor also determines whether the mixer can work for a long time. Maybe you encounter the motor heating when using the automatic mixing vehicle. Yes, yes, the motor will also dissipate heat and generate heat after working for a long time. In addition, there are two main reasons for the serious heating of the motor after the use of the automatic mixing vehicle:

一、电机绕组热量散发多，没能及时通过外壳散发掉。

1、 The heat of the motor winding is dissipated too much and cannot be dissipated through the shell in time.

二、电机外壳散发热量的能力较差。

2、 The ability of the motor shell to dissipate heat is poor.

这两种因素都可能造成自动搅拌一体车的电机热量太大而导致电机被烧毁。这两种因素造成电机过热其根本原因在于：

Both of these factors may cause the motor of the automatic mixer truck to be burned due to too much heat. These two factors lead to motor overheating. The root causes are:

一、自动搅拌一体车电机绕组产热太多，其根本问题是在于电机导线非纯铜导线所导致的，纯铜导线导电能力强，电阻小，因此产热少，如果其他材质导线电机工作时电阻大产热多；

1、 The fundamental problem is that the motor winding of the automatic mixing integrated vehicle produces too much heat, which is caused by the fact that the motor conductor is not a pure copper conductor. The pure copper conductor has strong conductivity and low resistance, so it produces less heat. If the conductor of other materials has high resistance and produces more heat when the motor works;

二、自动搅拌一体车作业后电机外壳散热的能力差，根本问题在于外壳是非纯铝材质。合金铝不但质量轻，而且散热的能力更强，采用其他材质作为电机外壳，散热的能力不如铝材质。。

2、 After the operation of the automatic mixer, the heat dissipation capacity of the motor shell is poor. The fundamental problem is that the shell is made of non pure aluminum. Alloy aluminum not only has light weight, but also has stronger heat dissipation capacity. Using other materials as motor shell, the heat dissipation capacity is not as good as aluminum..

以上就是为大家介绍的有关自动搅拌一体车的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.shanqijituan.cn/

The above is a detailed introduction to the automatic mixer, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.shanqijituan.cn/

上一页：全自动上料搅拌车发动机早期损坏的原因有哪些？下一页：自动混凝土搅拌车减震器漏油的六大原因

热门产品 / HOT PRODUCT