残渣的处理办法一:
Treatment method I of residue:
准备好紧迫驱动软管,将问题小型混凝土搅拌车熄火,卸下液压马达上的高压油管接头。将救援车熄火,将其液压马达的高压油管卸下,并与问题车上的对应接头用紧迫驱动软管相连。发起救援车,将其操作手柄拨出料方位,问题车内的混凝土即被排出。紧迫驱动结束后,将驱动软管卸下,并恢复两车原状。
Prepare the emergency drive hose, turn off the small concrete mixer in question, and remove the high-pressure oil pipe connector on the hydraulic motor. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it with the corresponding connector on the problem vehicle with emergency drive hose. Launch the rescue vehicle, turn its operating handle to the discharge direction, and the concrete in the problem vehicle will be discharged. After the emergency drive, remove the drive hose and restore the two vehicles to their original state.
残渣的处理办法二:
Treatment method 2 of residue:
假如上种办法实施有困难,则选用以下办法,当即排出混凝土。在小型混凝土搅拌车残渣的处理托轮和滚道之间放入木楔,以操控搅拌筒的旋转;将发起机熄火,拆松液压马达的一根高压油管,搅拌筒可自在旋转,操控搅拌筒的旋转,使修理孔转到下部,然后翻开修理孔,整理出筒内混凝土。混凝土排出结束后,恢复小型混凝土搅拌车残渣的处理的原状。
If it is difficult to implement the above method, the following methods shall be selected to discharge the concrete immediately. Put a wooden wedge between the treatment supporting wheel and the raceway of the residue of the small concrete mixer to control the rotation of the mixing drum; Turn off the starter, remove a high-pressure oil pipe of the hydraulic motor, and the mixing drum can rotate freely. Operate the rotation of the mixing drum to turn the repair hole to the lower part, and then open the repair hole to sort out the concrete in the drum. After the discharge of concrete, restore the treatment status of residue of small concrete mixer truck.
. The above is the automatic concrete mixer http://www.sqjituan.cn Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!