自动搅拌车刹车异常怎么判断?车辆行驶,是很重要的,专用车亦是如此,搅拌车是专用车的一种,主要是用来运输混凝土的,在建筑工地使用较多。自动混凝土搅拌车的重 心较高,行驶范围内的路况一般比较差,因此更要重视行车的,而刹车是自动混凝土搅拌车上使用较为频繁的部件之一,刹车性能的好坏对整车的相当重要,驾驶搅拌车的司机一定要学会判断刹车异常的技巧,不能等刹车失灵,那样后果就严重了。下面给大家介绍一下哪些情况预示着刹车将要出现问题。
How to judge the abnormal brake of automatic concrete mixer? Vehicle driving, safety is very important, special vehicle is also so, mixer is a kind of special vehicle, mainly used to transport concrete, more used in construction sites. The center of gravity of the automatic concrete mixer is high, and the road condition within the driving range is generally poor. Therefore, more attention should be paid to the safety of driving. The brake is one of the frequently used parts of the automatic concrete mixer, and the brake performance is very important for the safety of the whole vehicle. The driver of the mixer must learn the skill of judging the abnormal brake, and can't wait for the brake failure, Then the consequences will be serious. Now let's talk about which conditions indicate that the brake will have problems.
1. 刹车异常要注意:自动混凝土搅拌车踩刹车时,刹车系统发出尖锐刺耳的金属摩擦声,这可能是因为刹车片变薄、刹车坑洼、刹车片中有异物或刹车盘生锈等导致,一般情况下多踩几脚刹车异响都会有缓解。
1. Attention should be paid to the abnormal brake: when the automatic concrete mixer truck steps on the brake, the brake system makes a sharp metal friction sound, which may be caused by the thinning of the brake pad, the brake crater, the foreign matter in the brake pad or the rust of the brake disc, etc. generally, the abnormal brake sound will be alleviated by stepping on more feet.
2. 刹车踏板行程变长,就是我们常说的刹车变软。刹车行程变长的原因主要是刹车系统中进入空气、缺少刹车油,可能是存在泄漏、刹车片磨损严重等。
2. The brake pedal travel becomes longer, that is, the brake becomes soft. The main reasons for the longer brake stroke are air entering into the brake system, lack of brake oil, leakage, serious wear of brake pads, etc.
3. 刹车跑偏,刹车跑偏的现象一般出现的不多,主要体现在踩刹车时方向盘有明显的向一侧偏转。导致这种现象的原因可能是刹车片偏磨、刹车分泵有问题等。
3. Brake deviation, the phenomenon of brake deviation is generally not much, mainly reflected in the obvious steering wheel deflection to one side when stepping on the brake. The causes of this phenomenon may be the eccentric wear of the brake pad and the problem of the brake cylinder.
4.刹车变硬,很多司机会碰到刹车变硬的问题,刹车变硬的主要原因是真空助力器故障导致刹车无助力、频繁踩刹车后导致等造成。
4. The brake becomes hard. Many drivers will encounter the problem of brake becoming hard. The main reasons for brake becoming hard are the failure of vacuum booster, which leads to the brake not being assisted and frequently stepping on the brake.
5.搅拌车踩刹车时反弹,这种情况也比较常见,在踩下刹车时刹车踏板有反弹顶脚的现象,这种现象多是刹车盘、刹车片表面不平、钢圈变形等导致的。以上这些只是刹车系统问题的一部分,在驾驶搅拌车的过程中,如果你感觉刹车不正常,一定不能大意,自己先停车查看原因,如果自己搞不定,就到维修站去维修,千万不要拖延时间,否则能出现大问题就得不偿失了。
5. It is common for the mixer truck to rebound when stepping on the brake. When stepping on the brake, the brake pedal will rebound and push the foot. This phenomenon is mostly caused by the uneven surface of the brake disc and brake pad, and the deformation of the steel ring. These are just part of the problem with the brake system. In the process of driving a mixer, if you feel that the brake is not normal, you must not be careless. You should stop to check the reason first. If you can't make up your mind, you should go to the maintenance station to repair it. Don't delay the time. Otherwise, the big problem will not be worth the loss.
感谢您的阅读,希望以上内容对您有所帮助,如您想了解更多精彩内容请点击我们的官网:
自动混凝土搅拌车。
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: automatic concrete mixer.