混凝土搅拌机结构简单,操作方便,但操作中也存在许多小问题。 虽然这是一个小问题,但我们还需要找到理由并完全。 盲目检查不仅破坏了时间,也不一定完全它们。 对于混凝土搅拌机在正常运行期间不排放的缺点,我们将给您一些检查方法,看看原因是什么。
The structure of concrete mixer is simple and easy to operate, but there are many small problems in operation. Although this is a small problem, we still need to find a reason and solve it completely. Blind inspection not only destroys time, but also does not necessarily eliminate them completely. For the defect that the concrete mixer does not discharge during normal operation, we will give you some inspection methods to see what the reason is.
在混凝土搅拌机的生产过程中,遇到了不排放的外观。 许多用户遇到这种缺点,他们普遍认为混凝土搅拌机存在缺陷。 他们会检查调音台。 检查后,混凝土搅拌机没有缺点。 这会破坏生产时间。
In the production process of concrete mixer, there is no discharge appearance. Many users encounter this shortcoming, they generally believe that the concrete mixer has defects. They'll check the mixer. After inspection, the concrete mixer has no defects. This will destroy the production time.
在正常情况下,混凝土搅拌机在搅拌时间达到零后自动获取搅拌时间。 然而,当在生产过程中按下控制台上的暂停按钮时,达到搅拌时间,并且混合器不排出。 此时,检查混凝土搅拌机卸料门上的电磁阀,看电磁阀是否损坏。 如果电磁阀损坏,排放阀将不会打开。 混合器不能正常放电,需要修理电磁阀。 如果不是电磁阀的缺点,则需要检查控制台上的暂停按钮是否被按下,如果没有按下,则按下它。
Under normal circumstances, the concrete mixer will automatically obtain the mixing time when the mixing time reaches zero. However, when the pause button on the console is pressed during production, the mixing time is reached and the mixer does not discharge. At this time, first check the solenoid valve on the discharge door of the concrete mixer to see if the solenoid valve is damaged. If the solenoid is damaged, the drain valve will not open. The mixer can not discharge normally, and the solenoid valve needs to be repaired. If it is not the defect of the solenoid valve, it is necessary to check whether the pause button on the console is pressed. If not, press it.
如果对控制台上的按钮毫无疑问,则需要检查计算机的监控界面,以查看监控界面上的阻塞输出控件是否已。 如果它被,它将被撤销。 如果毫无疑问混凝土搅拌机已经破碎,则需要检查搅拌机。
If there is no doubt about the buttons on the console, you need to check the computer's monitoring interface to see if the blocking output control on the monitoring interface is activated. If it is activated, it will be undone. If there is no doubt that the concrete mixer has broken, the mixer needs to be checked.