小型混凝土搅拌罐在工作的时候需要保证它自身的温度,如果过冷或者温度过高的话,会造成设备在质量上的损坏,也会造成它的工作效率上的问题等,那么在如何保持其温度的问题上,我们应该怎么做才是更好的措施呢?
The small concrete mixing tank needs to ensure its own temperature when working. If it is too cold or too high, it will cause damage to the quality of the equipment and also cause problems in its working efficiency. So what should we do to maintain its temperature?
一、设备中骨料仓:骨料仓保温主要是搭设保温棚,保温棚高度须满足装载机上料高度。
1、 Aggregate bin in the equipment: the insulation of aggregate bin is mainly to set up an insulation shed, and the height of the insulation shed must meet the loading height of the loader.
二、设备中皮带机:皮带机保温主要采用保温棉或防寒毡对四周进行覆盖,防止砂石热量散失。
2、 Belt conveyor in the equipment: the belt conveyor is mainly covered with insulation cotton or cold proof felt to prevent heat loss of sand and gravel.
三、搅拌主机:根据搅拌罐车的特点搅拌主机位于搅拌楼内,冬季到来时将搅拌楼四周封闭严实,内部采用 2KW 的发热管加热,具体安装发热管数量根据气温而定。
3、 Mixing main machine: according to the characteristics of the mixing tank truck, the mixing main machine is located in the mixing building. When winter comes, the mixing building will be tightly closed around, and the inside will be heated by a 2KW heating pipe. The specific number of heating pipes installed depends on the temperature.
四、设备中的主机搅拌机启动前,搅拌手检查各部件动作是否灵活,加热搅拌机减速器,防止启动负荷过大烧毁控制电器。
4、 Before starting the main mixer in the equipment, the mixing hand shall check whether the action of each component is flexible, and heat the mixer reducer to prevent the control appliance from burning down due to excessive starting load.
以上就是小编整理有关小型混凝土搅拌罐的保温措施,希望能对你有所帮助。
The above are the thermal insulation measures for small concrete mixing tanks. I hope they can help you.
This article is provided for you by the automatic concrete mixer. Our website is: http://www.sqjituan.cn We will serve you with wholehearted enthusiasm and welcome your visit