混凝土搅拌车的搅拌箱如何清洁_公司新闻_自动混凝土搅拌机知识_自动混凝土搅拌机_自动混凝土搅拌车厂家

站内搜索

自动混凝土搅拌机知识

公司新闻行业资讯

热点

正确操作混凝土搅拌车这些情况要熟知！

2020-09-21

全自动混凝土搅拌车漏油现象怎么避免？

2020-12-19

混凝土全自动搅拌车干燥罐使用多久该更换？

2021-03-05

购买的混凝土搅拌车上装如何正确的安装调试？

2021-04-16

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

混凝土搅拌车的搅拌箱如何清洁

所属分类：公司新闻发布时间：2022-04-25 来源：http://www.sqjituan.cn/ 浏览量：0

混凝土搅拌机是运输混凝土的专用工具。混凝土会腐蚀钢和油漆。在运输过程中，混凝土将在短时间内固化成硬块。因此，每次运输混凝土后，都需要仔细清洗并粘附。保持混凝土在混凝土罐中以及混凝土搅拌罐和车辆进出口的清洁，以使混凝土搅拌车的使用寿命更长，减少不必要的经济损失，并为您带来更多的财富和收入。

Concrete mixer is a special tool for transporting concrete. Concrete corrodes steel and paint. During transportation, the concrete will solidify into hard blocks in a short time. Therefore, after each transportation of concrete, it needs to be carefully cleaned and adhered. Keep the concrete in the concrete tank and the import and export of concrete mixing tank and vehicle clean, so as to prolong the service life of concrete mixing vehicle, reduce unnecessary economic losses, and bring you more wealth and income.

那么如何清洗混凝土搅拌车的水箱，下面介绍每次混凝土加载前后的操作步骤，希望对您有所帮助。

Then how to clean the water tank of the concrete mixer? The following describes the operation steps before and after each concrete loading, hoping to help you.

装载后，用清水冲洗入口，以清洁入口附近的剩余混凝土，以防止运输后干燥后混凝土吸附在入口上。干燥的混凝土不易清洗。每次运输混凝土时，都要用水冲洗进料口，以保持装载的混凝土入口湿润。在施工现场卸货后，及时用自带的清洗水冲洗卸料斜槽，然后向混凝土储罐中添加一些清洁水，以保证车辆返回时混凝土储罐缓慢转动。及时将水箱中的混凝土残渣干燥，以防止混凝土吸附在水箱内壁上。当它到达搅拌站并重新装填混凝土时，要排掉水箱中的清洁水，然后重复相同的步骤。在将混凝土运输到罐体和进料口时避免混凝土吸附；装载混凝土时，请勿懒散，并用清洗水填充车辆随附的清洗水箱，并始终注意清洗水箱的水位，以免在清洗或进水时没有水；

After loading, wash the inlet with clean water to clean the remaining concrete near the inlet to prevent the concrete from adsorbing on the inlet after drying after transportation. Dry concrete is not easy to clean. Each time the concrete is transported, the feed inlet shall be flushed with water to keep the loaded concrete inlet wet. After unloading at the construction site, wash the discharge chute with its own cleaning water in time, and then add some clean water to the concrete storage tank to ensure that the concrete storage tank rotates slowly when the vehicle returns. The concrete residue in the water tank shall be dried in time to prevent the concrete from being adsorbed on the inner wall of the water tank. When it reaches the mixing plant and refills the concrete, first drain the clean water from the water tank, and then repeat the same steps. Avoid concrete adsorption when transporting concrete to tank and feed inlet; When loading concrete, do not be lazy, fill the cleaning water tank attached to the vehicle with cleaning water, and always pay attention to the water level of the cleaning water tank to avoid no water during cleaning or water inflow;

在工作时，需要仔细清洁油箱本体，进料口，卸料斜槽以及所有轮胎粘附在混凝土上的地方，以确保车辆的整体清洁。采取一些步骤，使您的财富工具持续更长的时间。带给您更多的财富。

During operation, it is necessary to carefully clean the fuel tank body, feed inlet, discharge chute and all places where the tires adhere to the concrete to ensure the overall cleanliness of the vehicle. Take some steps to make your wealth tools last longer. Bring you more wealth.

上一页：小型混凝土搅拌车气刹和油刹的不同之处在哪里？下一页：自上料搅拌机会发生侧翻的机率？

热门产品 / HOT PRODUCT