要先检查下离合油壳里的刹车油是否够用,如果油不够,离合怎么可能会生效?如果油量检查正常,那么先上车多踩几脚离合,看是否挂档有,那么是因为离合油路中存在空气,先排空气再试试。
First, check whether the brake oil in the lower clutch oil case is sufficient. If the oil is insufficient, how can the clutch take effect? If the fuel quantity is normal, step on the clutch for several times to see if there is air in the clutch oil circuit. Exhaust the air first and try again.
如果油够的活,请检查离合总泵、离合分泵四周有无漏油现象,混凝土自上料搅拌车厂家认为如果有漏油,在不考虑维修,只单单考虑问题的情况下,更换漏油的分泵或总泵处理。
If there is enough oil, please check whether there is oil leakage around the clutch master pump and the clutch slave pump. The manufacturer of the concrete self loading mixer thinks that if there is oil leakage, the leaking slave pump or master pump shall be replaced without considering maintenance and only considering solving the problem.
混凝土自上料搅拌车离合器不分离怎么办?
What if the clutch of concrete self loading mixer does not separate?
更换好漏油的总泵或分泵后,再次给离合总泵处的油壳加入刹车油;再找另外一人帮你起动一面猛踩离合踩到次数踩住不放,另一个人在下面排空气,排完后锁紧空气螺丝,再重复上述流程。混凝土自上料搅拌车
After replacing the leaking master cylinder or slave cylinder, add brake oil to the oil case at the clutch master cylinder again; Find another person to help you start and step on the clutch for several times. The other person will exhaust the air below. After that, lock the air screw and repeat the above process. Concrete self loading mixer
直到排到离合感觉高起来,放空气螺丝放不出气泡出来为止。锁紧放空气螺丝,同时检查离合分泵及总泵两者的分享推杆的自由间隙,一般为两到三毫米左右,手感有点间隙则可。
Until the clutch feels high and the air release screw can not release air bubbles. Lock the air release screw, and check the free clearance of the shared push rod of the clutch slave cylinder and the master cylinder, which is generally about two to three millimeters. If there is a little clearance, it is OK.
The above is the fully automatic self feeding mixer introduced to you http://www.jufengjiaobanji.com/ I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service