混凝土搅拌车压力不足的方法_公司新闻_自动混凝土搅拌机知识_自动混凝土搅拌机_自动混凝土搅拌车厂家

站内搜索

自动混凝土搅拌机知识

公司新闻行业资讯

热点

大型混凝土搅拌机这么用可以延长寿命

2022-12-12

自动混凝土搅拌机具有哪些生产优势？

2020-06-08

混凝土搅拌罐车启动困难的原因有哪些？

2022-01-24

自上料搅拌车运行效率降低的原因

2022-04-08

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

混凝土搅拌车压力不足的方法

所属分类：公司新闻发布时间：2022-05-11 来源：http://www.sqjituan.cn/ 浏览量：0

查看混凝土搅拌车液压泵是否能输出液压油。如果是新的液压泵，无液压油输出，可能是泵体有铸造缺陷(缩孔、砂眼等)，使吸油腔和压油腔相通，失去压油能力，应及时找厂家更换。若不是新的液压泵，无液压油输出，可能是泵的转向不对，零件磨损严重或损坏，及时更换。

Check whether the hydraulic pump of concrete mixer truck can output hydraulic oil. If it is a new hydraulic pump without hydraulic oil output, it may be that the pump body has casting defects (shrinkage cavity, sand hole, etc.), which connects the oil suction chamber and oil pressure chamber and loses the oil pressure capacity. It should be replaced by the manufacturer in time. If it is not a new hydraulic pump and there is no hydraulic oil output, it may be that the steering of the pump is wrong, and the parts are seriously worn or damaged. Replace them in time.

若混凝土搅拌车液压泵有油液输出，查看溢流阀工作是否正常。若不正常，则可能是压力油路中的某个阀有污物或其他原因卡住，处于回油位置，致使压力油路与溢流回路短路，也可能是管接头松脱，或处于压力油路中的某些阀泄漏严重，或液压缸、液压马达的密封损坏，严重泄漏。排除方法是拆开有关阀进行清洗，检查密封间隙的大小及各种密封装置，密封装置损坏应更换。

If the hydraulic pump of concrete mixer truck has oil output, check whether the overflow valve works normally. If it is abnormal, it may be that a valve in the pressure oil circuit is stuck due to dirt or other reasons and is in the oil return position, resulting in a short circuit between the pressure oil circuit and the overflow circuit, or the pipe joint is loose, or some valves in the pressure oil circuit leak seriously, or the seals of the hydraulic cylinder and hydraulic motor are damaged and leak seriously. The troubleshooting method is to disassemble the relevant valves for cleaning, check the size of the sealing gap and various sealing devices, and replace the damaged sealing devices.

若水泥小型混凝土搅拌车的液压泵输出流量随压力升高而显着减小，且压力达不到规定值，则是由于液压泵磨损后间隙变大所致。排除方法是测定液压泵的容积效率，即可确定该泵是否能继续使用，对磨损严重的零件，应进行修配或更换。

If the output flow of the hydraulic pump of the small cement concrete mixer decreases significantly with the increase of pressure, and the pressure cannot reach the specified value, it is due to the larger clearance after the hydraulic pump is worn. The elimination method is to measure the volumetric efficiency of the hydraulic pump to determine whether the pump can continue to be used. The parts with serious wear should be repaired or replaced.

本文的精彩内容由自动混凝土搅拌车提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.sqjituan.cn我们有专门的客服为您解答问题

The wonderful content of this article is provided by the knowledge of automatic concrete mixer. There are many wonderful contents on this website. You can click to enter more contents: http://www.sqjituan.cn We have special customer service to answer your questions

上一页：自动上料搅拌车的四大功能下一页：小型混凝土搅拌车气刹和油刹的不同之处在哪里？

热门产品 / HOT PRODUCT